The Bass Nirvana is bass guitar analogue delay pedal. This pedal has a very warm tone and a deep rich sound which is great for the bass guitar. 4 control knobs allowing you to set your perfect tone, level, delay and repeats and the Nirvana will give you up to 620ms of delay.The blue halo light ring installed diffuses the light when playing live, avoiding being blinded by the standard LEDs just as you are about to go into that all important solo thus giving a larger area to see where the pedal is located easily on the pedal board on darkened stages. The addition of the aluminium foot topper gives you more real estate for contact when switching the pedal on and off during quick changes when playing live.All Flattley “Platinum Range” pedals are hand processed in our Flattley paint shop. The bare aluminium enclosure is abraded prior to painting with the etch primer. The etch primer acts as a anti corrosive layer and allows the primer to bond to the enclosure ensuring a tough resilient paint finish.Multiple coats of base coat primer are applied which are then lightly abraded to remove any blemishes or paint speckles prior to the application of the base colour. We apply several coats of base colour until an even coverage occurs and the base colour develops rich smooth depth. Metallic holographic chrome flake is then applied using a clear inter coat which adds that all important Flattley sparkle.Hersteller / Manufacutrer InfoFlattley Guitar Pedals4A Hall Close, Park View HouseNG34 9SFHeckingtonpaul@fgpuk.comwww.flattleyguitarpedals.comImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guideThe pedal enclosure is now ready to be hydro dipped in its Flattley graphics. This is the process whereby the graphics are applied using water activated film, the residual PVA film is then washed off and the enclosure is then allowed to dry naturally.Once dried the lacquer process begins. Each “Flattley Platinum” pedal has a minimum of three coats of lacquer which are all wet sanded between coats. Once the lacquer has hardened, it is then hand polished using three different grades of polishing compounds and it then has a final polish to achieve a high gloss finish using a wool finishing pad. This process gives the smooth deep lustre finish that is inherent in all Flattley Guitar and Bass effects pedals.

The “Bass Star Fazer” is a 4 phase stage bass phaser with a quartet of matched transistors. The two control knobs allow you to dial in depth and rate giving you a clean, smooth super phasing effects.The purple halo light ring installed diffuses the light when playing live, avoiding being blinded by the standard LEDs just as you are about to go into that all important solo thus giving a larger area to see where the pedal is located easily on the pedal board on darkened stages. The addition of the aluminium foot topper gives you more real estate for contact when switching the pedal on and off during quick changes when playing live.All Flattley “Platinum Range” pedals are hand processed in our Flattley paint shop. The bare aluminium enclosure is abraded prior to painting with the etch primer. The etch primer acts as a anti corrosive layer and allows the primer to bond to the enclosure ensuring a tough resilient paint finish.Multiple coats of base coat primer are applied which are then lightly abraded to remove any blemishes or paint speckles prior to the application of the base colour. We apply several coats of base colour until an even coverage occurs and the base colour develops rich smooth depth. Metallic holographic chrome flake is then applied using a clear inter coat which adds that all important Flattley sparkle.The pedal enclosure is now ready to be hydro dipped in its Flattley graphics. This is the process whereby the graphics are applied using water activated film, the residual PVA film is then washed off and the enclosure is then allowed to dry naturally.Once dried the lacquer process begins. Each “Flattley Platinum” pedal has a minimum of three coats of lacquer which are all wet sanded between coats. Once the lacquer has hardened, it is then hand polished using three different grades of polishing compounds and it then has a final polish to achieve a high gloss finish using a wool finishing pad. This process gives the smooth deep lustre finish that is inherent in all Flattley Guitar and Bass effects pedals.Hersteller / Manufacutrer InfoFlattley Guitar Pedals4A Hall Close, Park View HouseNG34 9SFHeckingtonpaul@fgpuk.comwww.flattleyguitarpedals.comImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

Centurion SilverThe Flattley Silver Centurion was recently featured in Guitarist Magazine Issue 474 August 2021 and further details on this amazing review can be found  on our “News” section under the “Home” and “About” pages. You can also watch the Guitarist Magazine demo video of the Silver Centurion on its product pageThe Flattley “Silver Range” Silver Centurion pedal is Flattley Guitar Pedals version of a very famous type of transparent overdrive pedal. This pedal is perfect to use on its own to get mild gain sounds that just starts to break up or go full tilt to get a full-on overdrive sound when your amp is set on the clean channel. Alternatively, you can use this pedal to boost an over-driven tube amp or overdrive, distortion, fuzz and muff pedals that will give an amazing sound, clarity and tone. This pedal also cleans up when you turn down the guitar volume without losing the overall volume levels so it is a very versatile pedal that can be used for many different types of applications.Silver Centurion hints and tips:The Silver Centurion is a transparent overdrive in the same way that a Klon Centaur is. Transparent means that it doesn’t drastically change the colour of your tone so when you turn the pedal on, it won’t sound like a different guitar tone. It will sound like the same tone, but better. My Strat is just “more Strat”… etc.This is achieved by separating the frequency spectrum up into several bands and treating each differently. Bass frequencies are passed through untouched giving a full bottom end, treble frequencies also pass through but can be boosted by the tone control, mid frequencies go through a soft clipping circuit to give them an amplitude dependent boost to the harmonics. The gain control controls gain and volume simultaneously to vary the sensitivity and width of the mid band of frequencies.The pedal also acts as a buffer when in standby which is an advantage if you use it as the first pedal in a chain of effects. This gives you two ways to use the Silver Centurion…It can be used as a clean boost for your amplifier. A booster adds some extra girth to your signal to push your amp a little harder. Set up a clean tone on your amp and experiment with the pedal. Start off with a low drive level, then gradually build the pedal gain up as you play. You’ll learn how the pedal changes as you add in more gain. If you have a tube amp, you’ll be able to hear how the pedal also begins to push your amp at a certain stage.You can also set your amp to the point where it’s on the verge of breaking up, then use the pedal to push the amp into overdrive. This is another common way of using a transparent overdrive pedal.Another way to use a Silver Centurion is to stack it with other drive pedals. You can use a pedal (or your amp) to produce your main drive tone, then you can add in the Silver Centurion when you want your tone to have a bit more sparkle or boost.The blue halo light ring installed diffuses the light when playing live, avoiding being blinded by the standard LEDs just as you are about to go into that all important solo thus giving a larger area to see where the pedal is located easily on the pedal board on darkened stages. The addition of the large aluminium foot topper gives you more real estate for contact when switching the pedal on and off during quick changes when playing live.All Flattley “Silver Range” pedals are hand processed in our Flattley paint shop. They are etch primed first to ensure that the primer bonds to the aluminium enclosure which also provides an anti-corrosive protection layer. Multiple coats of base coat primer applied, the silver base coat colour is then applied and topped off with several coats of lacquer. Once the lacquer is hardened, it is then hand polished to achieve the smooth deep lustre finish that is inherent in all Flattley Guitar and Bass effects pedals. The graphics designed in house by our graphics designer Phoebe Flattley are applied to “Silver Range” effects pedals by UV direct printing in our printing shop.Volume: Controls the overall output level.Gain: Controls the amount of gain/overdriveTreble: Controls the amount of treble/bassThe Silver Centurion comes in a 1590BB Enclosure (LxWxD): 119 x 94 x 30 mm (67 x 3.68 x 1.18 inch)Standard negative centre,-9v dc tip power supply unit/power brick requiredNo internal 9v dc battery function 20mm anodised aluminium control knobsBlue halo light ring installedThe Silver Centurion comes with a large black custom aluminium foot topper This edition comes in silver paint and black graphics. All our pedals are handmade, hand wired, boutique custom guitar and bass pedal effects manufactured in the UK using only the highest quality components ensuring every aspect of our pedal’s build process results in a truly outstanding product.Hersteller / Manufacutrer InfoFlattley Guitar Pedals4A Hall Close, Park View HouseNG34 9SFHeckingtonpaul@fgpuk.comwww.flattleyguitarpedals.comImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

Die Real 54' Strat-Pickups entsprechen den ursprünglichen Spezifikationen der Fender Stratocaster-Tonabnehmer aus den 50er Jahren. Diese Tonabnehmer sind für diejenigen gedacht, die für ihre Stratocaster einen echten 50er-Jahre-Sound suchen. Real '54er sind in der Art wie wir sie gewickelt sind den Vintage Hots, aber wir verwenden hier AlNiCo III anstelle von AlNiCo V-Magneten. Dadurch erhalten die Real '54er einen helleren, zarteren Ton. Außerdem können die Spieler den Tonabnehmer nahe an die Saiten bringen, ohne dass der Tonabnehmer die Saiten verstimmt. Real '54er sind großartig für jeden, der eine dunkel klingende Gitarre ausbalancieren möchte.Lindys Strat Pickups sind exakte Kopien der Fender Tonabnehmer der späten 50er, frühen 60er Jahre. Die Tonabnehmer klingen sehr offen und lebendig. Sie unterstützen das Klangspektrum Ihrer Gitarre, ohne sie ihrer Eigenheiten zu berauben, selbst in Verbindung mit High-Gain Verstärker-Schaltungen. Sie werden, wie alle Fralin Tonabnehmer per Hand gewickelt. Man benutzt dieselben hochwertigen Materialien wie damals.Es gibt jedoch einige kleine Verbesserungen:Die einzelnen Tonabnehmer werden speziell für die entsprechende Position gewickelt (Steg - Mitte - Hals). Daher erhält man ein sehr ausgewogenes Lautstärkeverhältnis.Der mittlere Tonabnehmner ist mit ”reverse polarity” gewickelt, das bewirkt, dass in den Zwischenstellungen das übliche Brumm-Problem von Single-coils unterdrückt wird.Alle Fralin Tonabnehmer sind viel besser gewachst als die alten Fender-Pickups. Dadurch pfeifen sie nicht, auch bei höheren Lautstärke.Ca. Ohm-Werte:Hals - 6 KReverse Mitte - 6 KBrücke - 6,8 KDetails:Sauber, klar, hell und glasig, mit dynamischen MittenKompensierte Bridge für gleichmäßige Lautstärke über alle TonabnehmerInstallierte Baseplate bei Bridge-PickupIn den USA hergestellte Alnico 3-Magnete für optimale tonale Ausgewogenheit und AusgabeRW/RP Mittlerer Tonabnehmer für Brummton-Auslöschung in den Positionen 2 & 4Handgewickelt mit unserer "Sectioning"-Technik für einen einzigartigen, dynamischen TonHandgefertigte Faserplattenspulen für unübertroffene QualitätskontrolleHergestellt in den USAHersteller / Manufacutrer InfoLindy Fralin Pickups LLC 2015 West Laburnum Ave. 2. Floor23227 Richmond, VAU.S.A Phonre : 001-804-358-2699 info@fralinpickups.com https://www.fralinpickups.com/ImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

The TACKLEBERRY is a preamp particular designed for use with bass guitars and amplifiers. It is based around the boost circuit from a legendary 80's bass head and is able to deliver one of the most sought after bass sounds with that extra heavy thickness, punch and growl.The original concept was quite simple: Only one single knob to control the input signal which then feeds the JFET gain stage. We refinded this concept and added a second knob to set the desired output level. This way the TACKLEBERRY is much more versatile since you are now able to crank the gain knob while having the output set to moderate volume levels. Further we integrated a switch to choose between different input high pass filter options and which allows you to roll off the bass frequencies when needed. Last but not least there is a second switch for all the people who love to use the TACKLEBERRY as their dirt machine. When enabling one of the clipping options, the processed signal is getting clipped at higher gain levels and adds wonderful harmonics and distortion to your bass sound - just give it a try!Altough you can of course integrate the TACKLEBERRY into your setup as you like, the original circuit was primarily designed to push and overdrive the power amplifier. Due to its ultra high headroom the TACKLEBERRY stays almost clean if you put it just next after your bass guitar‘s output and simply adds some nice harmonic content to your signal. This placement makes it the perfect choice for your always-on pedal if you simply want to add that extra kind of magic to your bass sound. Stack the TACKLEBERRY with other pedals for heavy distortion and fuzz orgies or put it in the FX loop of your amplifier to directly push the power stage. There are so many options - be creative and get inspired!Hersteller / Manufacutrer InfoWEEHBO Guitar ProductsInhaber: Eike HintzenGöttinger Straße 5230449 Hannoverwww.weehbo.deinfo(at)weehbo(dot)comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

Das Basstortion von Z.VEX ist ein Overdrive-Pedal für E-Bass, das mit seinem röhrenartigen, besonders dynamischen Sound-Maßstäbe setzt. Das Pedal reagiert geschmeidig auf die Anschlagsintensität, was ausdrucksstarke Grooves ermöglicht. Regelmöglichkeiten: Drive, Tone, Volume, Bright/Dark-SwitchSpezifikation:Overdrive Effektpedal für E-BassLiefert einen dynamischen, röhrenartigen OverdriveTrue Bypass FußschalterBetrieb mit 9V-Batterie oder externem Netzteil (optional)Made in USAHersteller / Manufacutrer InfoZachary Vex Effects 4301 Hwy 7, Dock 3, St. Louis Park 55416 Minneapolis, MNUSA sales@zvex.com zvex.comwww.zvex.comImporterMAS Distro Europe Ltd MulrakinY35 E1X0 BridgetownIreland (+353)863058950 info@masdistro.com www.masdistro.comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

Mit dieser Power Plate können Sie ältere Z.VEX-Pedale so modifizieren, dass sie eine 9V-Gleichstromversorgung (Mitte negativ) akzeptieren. Passend für alle Z.VEX Pedals, außer Probes.Hersteller / Manufacutrer InfoZachary Vex Effects 4301 Hwy 7, Dock 3, St. Louis Park 55416 Minneapolis, MNUSA sales@zvex.com zvex.comwww.zvex.comImporterMAS Distro Europe Ltd MulrakinY35 E1X0 BridgetownIreland (+353)863058950 info@masdistro.com www.masdistro.comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide