The CN81 is an overdrive designed for superior Tone result. It is based on Pro Studio gears technology, for the best overdrive experience we use Discrete OpAmp, Class AB circuit driver and a True Coil output transformer.The CN81 creates smooth, warm, and hot overdrive without excess noise. Gain is enought to cover from clean boost to full on grind sound. We recoment to try higher voltage than 9VDC for enhance dynamics and touch response.When the CN81 is on, the output impedance is very low and able to drive long cables without any tone loss. The output transformer give an unique flavour to the sound: gentle high treble and massive and defined low end.Hersteller / Manufacutrer InfoLAA-CustomVia Nicola Porpora 710155 TorinoMail : info@laa-custom.comwww.laa-custom.comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

The Germanium Fuzz Mk.2 is our vision of what a FUZZ should be. Our goal was to solve some hisotical troubles of Fuzz like temperature drift, noise, not well defined low end. The Mk.2 is the perfect match btw raw good old fuzz and nowadays stability and dynamic response.Designed by Carlo Sorasio from blank page, this is not a modified Fuzz Face Fuzz or derived. It is a limited series because we use only NOS components from our private stock. The transistor selected is the great GT308 from USSR and we want to pay homage to this origins with a Soviet-style graphic design.The balance between low end and high treble is very smooth, never too much on both side and the Fuzz control is fully usable for different flavor of dirty or boost. The output and the dirty of the Fuzz is very input sensitive, you can obtain an amazing clean sparkle tone working on your guitar volume pot. The Germanium Fuzz work well also with mid output humbuckers and best is to use it on a tube channel at breack-up.VERY IMPORTANT: Germanium transistor used in the Germanium Fuzz Mk.2 work with positive ground, so you can use a standard 9VDC power supply BUT you should power it separated from the other pedals that use negative ground. Or, just use old 9V batteries, removing the input jack will preserve the battery and the current drain is very low, so battery has long life!Hersteller / Manufacutrer InfoLAA-CustomVia Nicola Porpora 710155 TorinoMail : info@laa-custom.comwww.laa-custom.comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

The NV81 is a buffer/boost based on class AB driver and true output transformer, with a variable gain recovery called COLOR that can be used for recovery the signal loss or give strenght to the original signal (0-3.5dB).The output impedance is very low and able to drive long cables without any tone loss. The output transformer give an unique flavour to the sound: gentle high treble and massive and defined low end.Switched “ON”, the NV81 delivers up to 19dB clean boost. the tone control “COLOR” is always engaged, enhancing the overall gain to the setting of choice.The NV81 can be used for both guitar and for bass, as the frequency response is flat from 20Hz and up. Position the NV81 at the start of a pedal chain to boost the other pedals, or alternatively, place the NV81 at the end of the effects chain to boost the input stage of the amplifier. Try it also as last before the Return (Amp Loop effects) for push your solo. The NV81 is a buffered bypass the output transformer is always on for give his unique color./Users/jurgenkirschner/Desktop/LAA Custom beschreibungen.txtHersteller / Manufacutrer InfoLAA-CustomVia Nicola Porpora 710155 TorinoMail : info@laa-custom.comwww.laa-custom.comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

he LAA Custom OP81 LEVELING AMPLIFIER OPTO LIMITER is a dynamic limiter built around a custom made optoisolator.As a limiter it reacts only to the peak signal and let the player able to manage the full dynamic response up till the set threshold.You can still play light, and clean your crunch with your guitar volume pot!The OP81 is our pedal version of the historical LA-2A circuit, using a custom made a cadmium-sulfide light dependent resistor to provide gain reduction.As make-up gain we use our True Coil technology: the hand wond output transformer driven by the Class AB driver gives an amazing texture to your signal giving strength and incisiveness to your overall tone.Try the OP81 with the PEAK REDUCTION full CCW and feel how the True Coil circuit works, then find your threshold level and RATIO to gentle limits your signal.Probably the OC81 will be always ON then!The OP81 circuit is made by two separate sections: the signal chain where the opto limiting circuit act for reduce the peaks and the Sidechain that drives the electro-optical attenuator system that allows instantaneous gain reduction with no increase in harmonic distortion.When you reach the intervention threshold setted by the PEAK REDUCTION knob, the OP81 gentle limits your peaks with three selectable RATIO levels.Decay time set how long the OP81 reduction circuit will work after the fist activation and you are able to manage single notes (short decay) or strumming (long decay).The small led under RATIO switch show you when the Reduction circuit is working and for how long it works.The average attack time is 10 milliseconds, the release time can vary from 100 to 650mS according the Decay Time knob position.Sidechain can be drived in two MODEs:FEED FOWARD: the input signal is used to drive the sidechain that limits your peaks - more “in your face”, more dynanics, and funk.FEEDBACK: the already processed signal is used to drive the sidechain what makes a more “stable” limiting effect - perfect for solo or hard rock rhythmic.Hersteller / Manufacutrer InfoLAA-CustomVia Nicola Porpora 710155 TorinoMail : info@laa-custom.comwww.laa-custom.comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

The PN81 is a four stage fuzz distotion, the three knobs allow a quick and easy set-up.PN81 is true bypass, but when on the output impedance is very low and able to drive long cables without any tone loss. The output transformer give an unique flavour to the sound: gentle high treble and massive and defined low end.We raccomend to try higher voltage than 9VDC for enhance the dynamics and touch response.Hersteller / Manufacutrer InfoLAA-CustomVia Nicola Porpora 710155 TorinoMail : info@laa-custom.comwww.laa-custom.comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

The ST81 is a boost, with a 2 band active EQ, his technology is based on Pro Studio gears, we use Discrete OpAmp, Class AB circuit driver and a True Coil output transformer.The output impedance is very low and able to drive long cables without any tone loss. The output transformer give an unique flavour to the sound: gentle high treble and massive and defined low end.Used on it’s own the ST81 can correct for deficiencies in tone or signal strength of instruments or amps; used in an effects chain the ST81 can correct or alter the tonal characteristics of other effects units.Used in the loop effects or at the end of the effects chain is a perfect SOLO boost, you can set the volume step and also the EQ for your solos.Use higher voltage than 9V for have a far better dynamics and touch response.Hersteller / Manufacutrer InfoLAA-CustomVia Nicola Porpora 710155 TorinoMail : info@laa-custom.comwww.laa-custom.comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

The Italian Wah is our vision of the long history between Italy and the Wah pedals. We are proud to declare that is the first wah MADE IN ITALY since '80.The whole project is based around our version of the HALO inductor, designed in three years of test, comparisons and prototypes.We want a wide sweep clear response wah effect without any volume drop and a complete compatibility with external pedals.The Italian Wah is true bypass, for keep your signal path clean when the pedal is off, but before and after the wah circuit we add an high impedance input buffer and a high impedance output driver with the output level setting. In this way you can use your preferred fuzz pedal in front or after the Italian Wah without any issue.We use the original enclosure, provided by Dunlop and made in California with a customized copper plated top and an adjustable clutch. We provide all the internal circuit and the custom winded HALO inductor.The Italian Wah is fully customizable by the user for best match the tonal response.Acting on dip switch and trimmer on the PCB board is possible to select the frequencies sweep, the low end response, the mids texture and the output level. These quick adjustments allow the user to set the Italian Wah as a custom-made suit. You can select between five main setting: Treble, Vintage, Classic, Modern, Bass.Hersteller / Manufacutrer InfoLAA-CustomVia Nicola Porpora 710155 TorinoMail : info@laa-custom.comwww.laa-custom.comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

LAA Custom The Italian Wah MullardHersteller / Manufacutrer InfoLAA-CustomVia Nicola Porpora 710155 TorinoMail : info@laa-custom.comwww.laa-custom.comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

LAA Custom TR81 TremoloHersteller / Manufacutrer InfoLAA-CustomVia Nicola Porpora 710155 TorinoMail : info@laa-custom.comwww.laa-custom.comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide