Disaster Area MIDI Cable Pro 3ft. / 91cm

These cables feature our exclusive metal right-angle plugs with rotating connector sleeves. The cables ship from Disaster Area with both ends set in the “12 o’clock” orientation but are easy to re-configure for your application. Simply loosen the screw on the head shell and carefully rotate the connector sleeve and pins to your desired orientation, then tighten the screw. The BT MIDI cables are perfect for flat boards such as Salvage, Trailer Trash, or LA Sound Design, and also work great on boards with cable access slots such as Pedaltrains.

Features:

• Four 24 AWG (42×40) Soft Bare Copper Conductors

• 95% Tinned Copper Braided Shield

• 0.245″ Outer Diameter PVC Jacket

• DN-5501 Right Angle Plugs rotate to 8 different positions

• Hand Soldered

• All 5 Pins Wired for Clock/SYNC Capabilities & Phantom Power

• Made in USA

The BT MIDI cables project approximately 0.75″ / 19mm from the DMC pedals with recessed MIDI jacks such as our DMC Gen3 and DMC.micro. They protrude approx. 1.06″ (27mm) from the MIDI Baby and qCONNECT.

Cable Length Guide:

• 8 inch: Perfect for going between two Strymon pedals placed next to each other on your pedalboard.

• 1 foot: We recommend 1ft. for connecting between our DMC or DPC controllers and your MIDI pedals on the same row.

• 1.5 foot: Connecting controllers or pedals on different rows of shallow boards such as the Pedaltrain PT-1 or PT-2.

• 2 foot: Connecting controllers or pedals on different rows of deeper boards such as the Pedaltrain Novo / PT-3 / PT-Pro.

• 3 foot: Connecting to off-board devices, connecting controllers at opposite corners of large boards.

Tip: Use a piece of string or an old guitar cable to measure the cable length you’ll need before ordering. Our cables are measured from plug to plug, when in doubt purchase one size longer than you think you need.

Hersteller Info

Disaster Area Designs LLC

2018 Garner Station Blvd

27603 Raleigh NC

USA

Mail : shipping@disasterareadesigns.com

www.disasterareadesigns.com

Importer

MAS Distro Europe Ltd

Mulrakin

Y35 E1X0 Bridgetown

Ireland

(+353)863058950

info@masdistro.com

www.masdistro.com

Sicherheit und Warnhinweise

Spezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.

Manufacutrer Information

Disaster Area Designs LLC

2018 Garner Station Blvd

27603 Raleigh NC

USA

Mail : shipping@disasterareadesigns.com

www.disasterareadesigns.com

Importer :

MAS Distro Europe Ltd

Mulrakin

Y35 E1X0 Bridgetown

Ireland

(+353)863058950

info@masdistro.com

www.masdistro.com

Safety Warnings

Specific safety instructions applicable to the product can be found in the user guide