Parts

The KingTone Switch opens the door to tone. This switch is fully encapsulated to protect against moisture. The design is 100% passive meaning you don’t need a battery. Its super easy to install, just two wires, one connects to the earth, the other wire connects to the Volume Pot. Easy!! Its true bypass so it won’t effect your normal tone, but will you want to go back to your normal tone?The Sound:True Bypass, your normal tone is un-effected100% Vaughan, tubey bite, lots of attack, fat and warmAlbert – what can I say the switch was named after himBB – extremely fat and thick but still has top end bite.Specifications:Fits inside your guitar4 tone positionsTrue Bypass5 Minute easy installationReplaces the often unused lower tone controlOpens up a huge range of incredible tonesIf there is a secret to great tone this might be it. Really!Made in USAHersteller / Manufacutrer InfoKingtone Inc.3079 Maiden Lane91001 Altadenahttp://www.kingtone.commail@kingtoneguitar.comImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

After a quick and easy installation, you’ll wonder why you never used a Fralin Baseplate before. It simply adds Bass and more Power to your Strat’s bridge pickup. The Fralin Baseplate is perfect for anyone looking to add some more functionality to their Strat, or boost their bridge pickup to match the output and power of their Neck and Middle pickups.The Fralin Baseplate can be used on any standard single-coil pickups, and is not brand specific. It can be installed on most manufacturer’s pickups.Our Baseplate is already prepped with a strong solder joint, lead for grounding, and is dipped in wax, so all you need to do is follow the simple instructions below for an easy, clean install.NEEDED FOR INSTALL:High-Powered Soldering PencilMasking TapeKnifeWire CutterHersteller / Manufacutrer InfoLindy Fralin Pickups LLC 2015 West Laburnum Ave. 2. Floor23227 Richmond, VAU.S.A Phonre : 001-804-358-2699 info@fralinpickups.com https://www.fralinpickups.com/ImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

Fralin Parts Kit: Guitar Parts Made Easy. We make some seriously good-sounding pickups. But, your guitar’s pickups are still at the mercy of your guitar’s electronics. Putting Boutique Pickups through cheap electronics is like driving a Porsche on donut tires. Your guitar deserves better.Thankfully, the Fralin Parts Kit comes to the rescue. The Lindy Fralin Parts Kits include all of the high-end guitar parts and electronics you need to take your guitar to the next level.Fortunately for you, we’ve done all the work for you. We’ve assembled all our preferred electronics into one convenient package! By purchasing one of our Parts Kits, you’ll equip yourself with every part you need to get your guitar sounding its’ best.Hersteller / Manufacutrer InfoLindy Fralin Pickups LLC 2015 West Laburnum Ave. 2. Floor23227 Richmond, VAU.S.A Phonre : 001-804-358-2699 info@fralinpickups.com https://www.fralinpickups.com/ImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

Fralin Parts Kit: Guitar Parts Made Easy. We make some seriously good-sounding pickups. But, your guitar’s pickups are still at the mercy of your guitar’s electronics. Putting Boutique Pickups through cheap electronics is like driving a Porsche on donut tires. Your guitar deserves better.Thankfully, the Fralin Parts Kit comes to the rescue. The Lindy Fralin Parts Kits include all of the high-end guitar parts and electronics you need to take your guitar to the next level.Fortunately for you, we’ve done all the work for you. We’ve assembled all our preferred electronics into one convenient package! By purchasing one of our Parts Kits, you’ll equip yourself with every part you need to get your guitar sounding its’ best.Hersteller / Manufacutrer InfoLindy Fralin Pickups LLC 2015 West Laburnum Ave. 2. Floor23227 Richmond, VAU.S.A Phonre : 001-804-358-2699 info@fralinpickups.com https://www.fralinpickups.com/ImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

The purpose of a Dogear Shim is to help raise the pickup to it’s ideal height. Since Dogears are Fixed-height pickups, this is the only way to get around it. Sure, P90’s have adjustable pole pieces, but, those are for micro-fine-tuning the string-to-string balance, not adjusting the entire pickup. Let’s dig into how we can measure for Shims, if you need one (or two)! We have three shim sizes available:Available dimensions:0.0626″ (1/16″) (1.6mm)0.1″ (~7/64″) (2.5 mm)0.225″ (~7/32″) (5.7mm)HOW TO MEASURE SHIM SPACING: Before we talk about Shims, let’s get into pickup height. The ideal pickup height is 1/16″ (0.06″, 1.6mm) from the top of the pole piece, to the bottom of the string- when pushed down at the highest fret. You only have to do this on the Low E and High E string. Here’s how to do it:Have a ruler handy, and push your low E string down at the highest fretMeasure the distance from the top of the pole piece to the bottom of the stringIdeal height should be 1/16″Repeat this on the High E StringSTANDARD DOGEAR SHIM SPACING:Since the cover of a Standard Dogear is 7/16″ High, and you need 1/16″ String Clearance, you need 1/2″ from the bottom of the string to the top of the guitar for ideal dogear height. If you measure taller than that, and you need a shim. Simply take the difference and install!For example, if you take the measurement, and you measure 9/16″, you’ll need a 1/16″ Shim.Hersteller / Manufacutrer InfoLindy Fralin Pickups LLC 2015 West Laburnum Ave. 2. Floor23227 Richmond, VAU.S.A Phonre : 001-804-358-2699 info@fralinpickups.com https://www.fralinpickups.com/ImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

The purpose of a Dogear Shim is to help raise the pickup to it’s ideal height. Since Dogears are Fixed-height pickups, this is the only way to get around it. Sure, P90’s have adjustable pole pieces, but, those are for micro-fine-tuning the string-to-string balance, not adjusting the entire pickup. Let’s dig into how we can measure for Shims, if you need one (or two)! We have three shim sizes available:Available dimensions:0.0626″ (1/16″) (1.6mm)0.1″ (~7/64″) (2.5 mm)0.225″ (~7/32″) (5.7mm)HOW TO MEASURE SHIM SPACING: Before we talk about Shims, let’s get into pickup height. The ideal pickup height is 1/16″ (0.06″, 1.6mm) from the top of the pole piece, to the bottom of the string- when pushed down at the highest fret. You only have to do this on the Low E and High E string. Here’s how to do it:Have a ruler handy, and push your low E string down at the highest fretMeasure the distance from the top of the pole piece to the bottom of the stringIdeal height should be 1/16″Repeat this on the High E StringSTANDARD DOGEAR SHIM SPACING:Since the cover of a Standard Dogear is 7/16″ High, and you need 1/16″ String Clearance, you need 1/2″ from the bottom of the string to the top of the guitar for ideal dogear height. If you measure taller than that, and you need a shim. Simply take the difference and install!For example, if you take the measurement, and you measure 9/16″, you’ll need a 1/16″ Shim.Hersteller / Manufacutrer InfoLindy Fralin Pickups LLC 2015 West Laburnum Ave. 2. Floor23227 Richmond, VAU.S.A Phonre : 001-804-358-2699 info@fralinpickups.com https://www.fralinpickups.com/ImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

BLENDER POT, PUSH-PULL HYBRID!Another Lindy Fralin original design! Lindy took our popular Blender Pot and designed a Push-Pull variation. Experience another layer of tonal configuration with Fralin Pickups Push Pull Blender Pot. This Custom Push-Pull Pot incorporates the Blender Pot element to allow you to blend and split at the same time. There are many uses for this pot, so let’s get into some cool ideas!This Push-Pull Pot’s Shaft is 1/2″, long enough to go into Les Pauls!No-Load Push Pull Pot:Our Blender Pot element takes the pot completely out of the circuit when it’s on “10”. This means that you can use this Push-Pull Pot as a No-Load pot! A great example would be a No-Load Tone Pot. Simply wire the pot section like a normal Tone Pot and the Blender Pot as needed!Hersteller / Manufacutrer InfoLindy Fralin Pickups LLC 2015 West Laburnum Ave. 2. Floor23227 Richmond, VAU.S.A Phonre : 001-804-358-2699 info@fralinpickups.com https://www.fralinpickups.com/ImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

Fralin Parts Kit: Guitar Parts Made Easy. We make some seriously good-sounding pickups. But, your guitar’s pickups are still at the mercy of your guitar’s electronics. Putting Boutique Pickups through cheap electronics is like driving a Porsche on donut tires. Your guitar deserves better.Thankfully, the Fralin Parts Kit comes to the rescue. The Lindy Fralin Parts Kits include all of the high-end guitar parts and electronics you need to take your guitar to the next level.Fortunately for you, we’ve done all the work for you. We’ve assembled all our preferred electronics into one convenient package! By purchasing one of our Parts Kits, you’ll equip yourself with every part you need to get your guitar sounding its’ best.Hersteller / Manufacutrer InfoLindy Fralin Pickups LLC 2015 West Laburnum Ave. 2. Floor23227 Richmond, VAU.S.A Phonre : 001-804-358-2699 info@fralinpickups.com https://www.fralinpickups.com/ImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

The Ulbrick Guitar Noise Reduction System eliminates the annoying hum of single-coil pickups.Over 40 years of experience as world-class guitar technicians, musicians, designers and manufacturers of guitar effects and handmade amplifiers have made the impossible possible.There are many ways to limit this hum, which are intrusive and complicated and ultimately hinder the sound of your single-coil pickups. That's why this is a completely new approach!It's incredibly simple, impossibly efficient and works far better than anything else, with no loss of sound - that's why we patented it!Now you can enjoy your favorite guitar in any situation, thanks to ULBRICK Guitar Noise Reduction in Melbourne.Details:Model 1 (5,5k - 6,5k)Handmade in Melbourne AustraliaPerfect for Stratocaster®, Telecaster®, Gretsch®, Fender Jaguar® and all other single-coil guitarsHersteller / Manufacutrer InfoEGM Distribution1131 Burke Road3101 Kew, Melbourme VicMail : ulbrickmusic@gmail.comwww.ulbrickmusic.com.auImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

The Ulbrick Guitar Noise Reduction System eliminates the annoying hum of single-coil pickups.Over 40 years of experience as world-class guitar technicians, musicians, designers and manufacturers of guitar effects and handmade amplifiers have made the impossible possible.There are many ways to limit this hum, which are intrusive and complicated and ultimately hinder the sound of your single-coil pickups. That's why this is a completely new approach!It's incredibly simple, impossibly efficient and works far better than anything else, with no loss of sound - that's why we patented it!Now you can enjoy your favorite guitar in any situation, thanks to ULBRICK Guitar Noise Reduction in Melbourne.Details:Model 2 (6,5k -7,5k)Handmade in Melbourne AustraliaPerfect for Stratocaster®, Telecaster®, Gretsch®, Fender Jaguar® and all other single-coil guitarsHersteller / Manufacutrer InfoEGM Distribution1131 Burke Road3101 Kew, Melbourme VicMail : ulbrickmusic@gmail.comwww.ulbrickmusic.com.auImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

The Ulbrick Guitar Noise Reduction System eliminates the annoying hum of single-coil pickups.Over 40 years of experience as world-class guitar technicians, musicians, designers and manufacturers of guitar effects and handmade amplifiers have made the impossible possible.There are many ways to limit this hum, which are intrusive and complicated and ultimately hinder the sound of your single-coil pickups. That's why this is a completely new approach!It's incredibly simple, impossibly efficient and works far better than anything else, with no loss of sound - that's why we patented it!Now you can enjoy your favorite guitar in any situation, thanks to ULBRICK Guitar Noise Reduction in Melbourne.Details:Model 3 (7,5 -10k) Handmade in Melbourne AustraliaPerfect for Stratocaster®, Telecaster®, Gretsch®, Fender Jaguar® and all other single-coil guitarsHersteller / Manufacutrer InfoEGM Distribution1131 Burke Road3101 Kew, Melbourme VicMail : ulbrickmusic@gmail.comwww.ulbrickmusic.com.auImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide

The Ulbrick Guitar Noise Reduction System eliminates the annoying hum of single-coil pickups.Over 40 years of experience as world-class guitar technicians, musicians, designers and manufacturers of guitar effects and handmade amplifiers have made the impossible possible.There are many ways to limit this hum, which are intrusive and complicated and ultimately hinder the sound of your single-coil pickups. That's why this is a completely new approach!It's incredibly simple, impossibly efficient and works far better than anything else, with no loss of sound - that's why we patented it!Now you can enjoy your favorite guitar in any situation, thanks to ULBRICK Guitar Noise Reduction in MelbourneDetails:Model 4 REV (for reversed wound middle PU's) 5,5K - 6,5 kHandmade in Melbourne AustraliaPerfect for Stratocaster® and all other single-coil guitars with 3 pickups and reversed wound middle PUHersteller / Manufacutrer InfoEGM Distribution1131 Burke Road3101 Kew, Melbourme VicMail : ulbrickmusic@gmail.comwww.ulbrickmusic.com.auImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guide