Skip to main content Skip to search Skip to main navigation
Menu

Accessories

Filter products

3 Products
Disaster Area DVC-18 Micro Voltage Converter
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Disaster Area DVC-18 Micro Voltage Converter

The DVC-18 is a micro-sized voltage converter unit.Simply plug a 9V power source into the input, and the DVC-18 will output up to 100mA of clean 18V power. Many pedals are compatible with an 18V power supply, in some cases the higher voltage results in greater headroom or more total volume output.Consult with the manufacturer for each pedal you wish to power with the DVC-18, Disaster Area Designs will not be held liable for any damage that may result from an overvoltage condition.The DVC-18 normally doubles the input voltage. A 9V input will result in an 18V output, while a 12V input will produce a 24V output.The DVC-18 is also available with a lower-voltage regulated output (12V or 15V versions.) The lower voltage versions should be run on a 9V input only.Features:Compact size: 2″ x 2″ x 0.83″ and small enough to fit under a Pedaltrain Nano or Mini boardHersteller InfoDisaster Area Designs LLC 2018 Garner Station Blvd 27603 Raleigh NCUSA Mail : shipping@disasterareadesigns.com www.disasterareadesigns.comImporterMAS Distro Europe Ltd MulrakinY35 E1X0 BridgetownIreland (+353)863058950 info@masdistro.com www.masdistro.comSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Manufacutrer InformationDisaster Area Designs LLC 2018 Garner Station Blvd 27603 Raleigh NCUSA Mail : shipping@disasterareadesigns.com www.disasterareadesigns.comImporter :MAS Distro Europe Ltd MulrakinY35 E1X0 BridgetownIreland (+353)863058950 info@masdistro.com www.masdistro.comSafety WarningsSpecific safety instructions applicable to the product can be found in the user guide100mA maximum output12v maximum input (the DVC-18 will output 24V from a 12V input)2.1mm x 5.5mm DC barrel jack input and output

Regular price: €65.00

Available, delivery time: ca. 1-3 Werktage

KingTone  - Battery Box 4X
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
KingTone - Battery Box 4X

Running your pedals from batteries improves tone and reduces noise.  The Kingtone Battery Box connects your batteries to your pedals with no components in-between, just battery directly connected to the pedal. Most other battery boxes use diodes or transistors to switch the batteries on and off, we use relays so there is no loss of voltage or tone. You no longer have to worry about unplugging your pedals to save batteries, the batteries are automatically connected and disconnected when you power up, or power down your pedalboard. Red and White LEDs clearly show when a battery is full or running low. The batteries can be changed in as little as 3 seconds, just pull the old one out and pop the new one in, no screws, no lids, no hassle. The battery box is fully isolated so you can mix and match positive ground pedals with negative ground pedals. Finally, the Kingtone Battery Box has a tiny foot print and  will take up to four 9 volt batteries.Details:Four 9v Battery SlotsFully Isolated. Allows You To Mix Positive and Negative Ground PedalsAutomatically Connects And Disconnects The BatteriesRed and White LEDs Clearly Show The Current Status of The BatteriesQuick Change, Batteries Can Be Swapped Out In SecondsHersteller / Manufacutrer InfoKingtone Inc.3079 Maiden Lane91001 Altadenahttp://www.kingtone.commail@kingtoneguitar.comImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.Safety WarningsSpecific safety instructions applicable to the product can be found in the user guideCNC Machined Aluminum CaseLaser Engraved Control Panel

Regular price: €219.00

Available in 8 weeks, delivery time 6-8 Wochen

Voodoo Lab Hex Rackmount Bracket Voodoo Lab Hex Rackmount Bracket
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Voodoo Lab Hex Rackmount Bracket

Mounts two Voodoo Lab Hex Audio Loop Switcher in a 19" rack Hersteller infoDigital Music Corp. 3165 Coffey Lane95403 Santa RosaU.S.A Phone : 001-707-545-0600info@vooodolab.com https://voodoolab.comImporterCotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSicherheit und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu findenManufacutrer InformationDigital Music Corp. 3165 Coffey Lane95403 Santa RosaU.S.A Phone : 001-707-545-0600info@vooodolab.com https://voodoolab.comImporter :Cotton Musical SupplyInh. Jürgen KirschnerVordergasse 1535510 ButzbachPhone : 06033-9238591info@cms-music.dewww.cms-music.netSafety WarningsSpecific safety instructions applicable to the product can be found in the user guide

Regular price: €45.00

Available in 8 weeks, delivery time ca. 1-3 Werktage